تم الحل ✓
categoryهندسة ميكانيكية
schoolبكالوريوس
event_available2026-07-13
السؤال
Transcribed Image Text:
G A block weighing 1 kN an XC Chegg Study | Guided Solt xxxxxxxxxxxxxxxxxxx (1).pdf x
→C file:///C:/Users/Raul/Downloads/xxxxxxxxxxxxxxxxxx%20(1).pdf
Conservative;
H
a4
2x4
+2-
a4
ax² ǝy
+
-(1
+
ay4
where
= stress function
Poisson's ratio
V scalar function whose gradient
[(av/ax)i(av/ay)j] is the
body-force distribution where
the body force is given per
unit volume
What would the dimensions have to be of the
stress function?
1.10 Convert the coefficient of viscosity μ from
units of dynes, seconds, and centimeters (i.e.,
poises) to units of pound-force, seconds, and
feet.
1.11 What are the dimensions of kinematic
viscosity? If the viscosity of water at 68°F is
2.11 x 10 lbs/ft², what is the kinematic
viscosity at these conditions? How many stokes
of kinematic viscosity does the water have?
1.12 Water is moving through a pipe. The velocity
profile at some section is shown and is given
mathematically as
stationary plate on a layer of oil. If the
velocity profile is that of a parabola, with the
oil at the plates having the same velocity as
the plates, what is the shear stress on the
moving plate from the oil? If a linear profile
is assumed, what is then the shear stress on
the upper plate?
Figure P1.13
Assumed profile
Vo
Oil
layer
1.14 A block weighing 1 kN and having dimensions
200 mm on an edge is allowed to slide down
an incline on a film of oil having a thickness of
0.0050 mm. If we use a linear velocity profile
in the oil, what is the terminal speed of the
block? The viscosity of the oil is 7 x 10-2 P.
1 KN
I'm Cortana. Ask me anything.
B (D²
V=
4μ 4
0.0050 mm
where
B = a constant
V
radial distance from centerline
velocity at any position r
What is the shear stress at the wall of the pipe
from the water? What is the shear stress at a
position r D/4? If the profile above persists
a distance L along the pipe, what drag is
induced on the pipe by the water in the
direction of flow over this distance?
-Velocity profile
Figure P1.14
1.15 A cylinder of weight 20 lb slides in a
lubricated pipe. The clearance between
cylinder and pipe is 0.001 in. If the cylinder is
observed to decelerate at a rate of 2 ft/s² when
the speed is 20 ft/s, what is the viscosity of
the oil? The diameter of the cylinder D is
6.00 in and the length L is 5.00 in.
日
6 in-
5 in
0
12:11 AM
9/9/2016
check_circle الجواب — حل مفصل خطوة بخطوة
hourglass_top
🔒
الحل الكامل متاح للمشتركين
اشترك في أرشيف الأسئلة لعرض هذا الحل وآلاف الحلول المفصلة خطوة بخطوة من معلمين معتمدين.