8-32 Write a documented PLC program that will implement the following packaging process: The purpose of this process is to deposit 10 pieces of the product in each container. >The process is set in operation by pressing a start button. As the product passes through the light beam, it is detected by the photoelectric proximity switch and counted by the PLC counter. When the count reaches 10, the solenoid-operated deflector plate (SOL A) energizes to channel the product from chute A to chute B. ➤ When the second count of 10 is reached, the solenoid-operated defector plate de- energizes to channel the product back to chute A, and so on. > Provisions are also made for stopping the process at any time and manually resetting the accumulated value of the counters. Photoelectric proximity switch O 000000000000 Light beam Product 00 Containers Chute A Chute B оо Solenoid-operated deflector plate (SOL A) Use the Bottle Line Simulator screen and the following addresses to simulate the program: Stop PB I:1/0 Start PB I:1/1 Proximity Sensor (NO) 1:1/6 Reset (NO) I:1/3 (Selector Switch Pos. B) Conveyor Motor M1 0:2/0 0:2/2 Gate Solenoid A_ 0:2/5 Conveyor Motor M2 CTU_C5:1 CTU C5:2