Q5-1: A computer uses a memory unit with 256K words of 32 bits each. A binary instruction code is stored in one word oi memory. The instruction has four parts: an indirect bit. an operation code, a register code part to specify one of 64 registers, and an address part. a. How many bits are there in the operation code, the register code part, and the address part? b. Draw the instruction word format and indicate the number of bits in each part. c. How many bits are there in the data and address inputs of the memory? Q5-4: The following register transfers are to be executed in the system of Fig. 5-4. For each transfer, specify: (1) the binary value that must be applied to bus select inputs S2, S₁, and So; (2) the register whose LD control input must be active (if any); (3) a memory read or write operation (if needed); and (4) the operation in the adder and logic circuit (if any). a. ARPC Wieder Memory unit 4096 x 16 Write Read AR LD INR CLR PC LD INR CLR DR LD INR CLR Adder and AC logic LD INR CLR LD INPR IR TR LD INR CLR LD OUTR Address 555 Clock 16-bit common bus Figure 5-4 Basic computer registers connected to a common but