• Each student should satisfy the following requirements: 1. Find the center of gravity for the system shown in figure 1. 2. Calculate the moment of inertia of each body about its center of mass (about z axis). 3. Calculate the moment of inertia of the system about point A (about z axis) which is shown in figure 1. Each student should submit the scanned solution (PDF file) on ITC before the deadline (14/1/2021). • For any questions you can ask your TA: section 2 and 4 with Hussein Naddaf, Ritaj Number 7596 section 1 and 3 with Muhammed Allan, email: mallan@birzeit.edu Note 1: The material used in this system is AISI 1023 carbon steel, and all dimensions is in inch. Note 2: symbol X in the dimension shown in figure 1 is the average of the last three numbers of your ID number. Example: If the ID number is 1153342, then X = is 3 x 0.8 2.4 inch. 3+4+2 3 =3, so the outside diameter of the wheel 0.04X 0.16X 0.34X 0.6X 00.2X 0.8X 0.2 X 0.2X 0.6X 0.2x 0.6X 00.65X 0.08X 0.22X N X9100 0.04X 00.17X