Design a sequential system that has a single input x. Use Logisim and JK flip flops to design the system. When x = 0, the system should count through 1,0,2, repeat. When x = 1, the system should count through 4,3,6,7,5, repeat. If the input x changes while in the "other sequence" the next clock tick should cause a transition to the start of the opposite sequence. For example, x = 1, and the counter is at 6. Then x changes to x = 0, the next clock tick should change the output to 1. (So, when x = 0, and current state = 110, the next state is 001). Show the output on a 7-segment display. For each state, use the binary value of the number that is to be shown on the 7-segment display. Use the following to design your 7-segment display output: 0123 4567 Show all work on this page and submit a CIRC file for your final design. (You should include a state table, Kmaps, and input equations to justify your work. You do NOT need a state graph).