for also attempting the second questions QUESTION I A bronze bar is fastened between a steel bar and an aluminum bar as shown below. Axial loads are applied at the positions indicated. Find the largest value of P that will not exceed an overall deformation of 3.0 mm, or the following stresses: 140 MPa in the steel, 120 MPa in the bronze, and 80 MPa in the aluminum. Assume that the assembly is suitably braced to prevent buckling. Use End 200 GPa, E70 GPa, and E83 GPa. Steel A=480 mm² Bronze A = 650 mm² Aluminum A = 320 mm² 3P 4P 1.0 m 2.0 m 1.5 m 2P